If I take my sd card out of my new 3ds and put it in my o3ds, will everything be there if b9s and luma are also installed on the o3ds? I'm trying to figure out how to move all of my games and saves over to my o3ds for now since my n3ds has internal damage and keeps shutting off.
↧
Will this work?
↧
Would Godmode9 + Cart Dumping/Installing + 3DS Data Transfer work?
I've installed most of my cartridge games using Godmode9 and FBI so that I can do local play on various games. I was curious however if using the 3DS data transfer between a Luma 3DS and default fw 3DS would work to transfer backups of games. Does anybody know if this has risk of damaging/bricking/banning the default 3DS and if this would work as it should, and also if this would work with DSiWare games?
↧
↧
Safe to update latest official firmware?
Hey!
Might been have questioned for a millionth time now on this thread but better safe than sorry?
It safe to upgrade to lastest official system?
I have nintendo ver 11.7 and Luma ver 8.1
should I upgrade the luma first or just update the system.
Is there any risk to update the firmware without updating the luma?
Can I play online after updating the system with luma?
thank you
Might been have questioned for a millionth time now on this thread but better safe than sorry?
It safe to upgrade to lastest official system?
I have nintendo ver 11.7 and Luma ver 8.1
should I upgrade the luma first or just update the system.
Is there any risk to update the firmware without updating the luma?
Can I play online after updating the system with luma?
thank you
↧
Luma 3DS home menu freezes launching apps or shutting down
Yesterday I was updating a Reinand 9.2 o3ds from a cousin(My 3DS works perfectly) to Luma because she updated the emunand(Don't know which version), and I had to update to Luma. I followed every aspect of the 3ds.guide, like I did with my 3DS. But when the home menu launched, with the menu, the games, etc of the emunand(In sysnand of course) didn't launch, instead the console freeze. I can't use the buttons because they don't work either, I must use the touchscreen, and can't even launch the...
Luma 3DS home menu freezes launching apps or shutting down
Luma 3DS home menu freezes launching apps or shutting down
↧
Need help with sysUpdate
I'm trying to downgrade my 3ds to 11.2 but when i open sysUpdate through homebrew and press y to downgrade it gives me this screen and crashes immediately afterwards, what do i do to fix?
↧
↧
Unmodded 3DS showing 'failed to download 1 firm' error?
I'm not really sure what's causing this, but it's really strange. The 3ds was modded prior but i moved everything to a new system that I got. I wanted to use this one for some of my cartridge games in the meantime because the battery started to go bad and needed to be replaced on my new 3ds xl
So, um... yeah. I don't know why this error is showing up if the console is technically no longer containing mods. It won't even boot now so I hope to find a work around.
I don't really have a backup...
Unmodded 3DS showing 'failed to download 1 firm' error?
So, um... yeah. I don't know why this error is showing up if the console is technically no longer containing mods. It won't even boot now so I hope to find a work around.
I don't really have a backup...
Unmodded 3DS showing 'failed to download 1 firm' error?
↧
Start 3DS after Nintendo system update with a 128GB microSD card
Hello to everybody,
I'm looking for help to understand why after a Nintendo system update the microSD is no more visible to the console.
At first I had the classical problem "Failed to apply Firm patch", and I put the new luma boot.firm file in the microSD root directory.
It didn't work and after a while I discovered that GodMode9 couldn't see anymore the microSD card, so probably the 3ds was booting CTRNAND (with the old boot.firm file and that's why it was not working).
I tried to use an...
Start 3DS after Nintendo system update with a 128GB microSD card
I'm looking for help to understand why after a Nintendo system update the microSD is no more visible to the console.
At first I had the classical problem "Failed to apply Firm patch", and I put the new luma boot.firm file in the microSD root directory.
It didn't work and after a while I discovered that GodMode9 couldn't see anymore the microSD card, so probably the 3ds was booting CTRNAND (with the old boot.firm file and that's why it was not working).
I tried to use an...
Start 3DS after Nintendo system update with a 128GB microSD card
↧
TWLoader/DSIMenu++ Installations?
So, looking for a way to play NDS ROMs on my 3DS(after sacrificing my R4 to LumaCFW it), I came across TWLoader. I went ahead and installed everything, and it worked.
...except for when there's a .nds file in SD\roms\nds folder.
So I went and looked a bit more, and found DSIMenu++, but everything about that stupid thing is extremely vague, or everyone says to stay with TWLoader.
I'm just looking for a straight answer :
Stick with TWLoader
Figure out DSIMenu++
Buy another R4 you lazy person...
TWLoader/DSIMenu++ Installations?
...except for when there's a .nds file in SD\roms\nds folder.
So I went and looked a bit more, and found DSIMenu++, but everything about that stupid thing is extremely vague, or everyone says to stay with TWLoader.
I'm just looking for a straight answer :
Stick with TWLoader
Figure out DSIMenu++
Buy another R4 you lazy person...
TWLoader/DSIMenu++ Installations?
↧
Configuring this flashcard to mod 3DS
Hello guys,
I was trying to follow a guide on the 3ds hack website to configure a flashcard to mod the console. The only flashcard I have is the one you can see below. Does anyone have it? (It's very very old I think) I don't know if it can be used because I don't have the necessary files inside its microSD (it's empty), so it doesn't even work on the Nintendo DS lite I have. I surfed the internet looking for those files, but I can't find them; the flashcard website is dead, so... don't...
Configuring this flashcard to mod 3DS
I was trying to follow a guide on the 3ds hack website to configure a flashcard to mod the console. The only flashcard I have is the one you can see below. Does anyone have it? (It's very very old I think) I don't know if it can be used because I don't have the necessary files inside its microSD (it's empty), so it doesn't even work on the Nintendo DS lite I have. I surfed the internet looking for those files, but I can't find them; the flashcard website is dead, so... don't...
Configuring this flashcard to mod 3DS
↧
↧
The ultimate list of NTRBoot compatible flashcards
Since the question "is XXX ntrboot compatible" comes up way too often and since there was/is much missinformation (even in the "holy guide"), I decided to make a list of all flashcards currently known to be ntrboot compatible.
Only flashcards from the specified websites are supported. Cards from similar websites are not supported.
Last update of this post: 3.3.2018.
You have absolutely no clue about "flashcards"?
The ultimate list of NTRBoot compatible flashcards
Only flashcards from the specified websites are supported. Cards from similar websites are not supported.
Last update of this post: 3.3.2018.
You have absolutely no clue about "flashcards"?
Here is a FAQ
The ultimate list of NTRBoot compatible flashcards
↧
Deleting NNID, will I lose installed CIAs?
Hey, I am giving away my 3DS, but I want to delete my NNID first (as in fully delete the account, not just remove it from the 3DS, as I have another one and just want to get rid of this one). Problem is the micro SD is filled with CIAs and I want them to stay where they are.
Can I go ahead and delete it or are they linked to the NNID meaning I will lose everything? If the latter, is there any way to keep them somehow eg backing them up somehow first?
Can I go ahead and delete it or are they linked to the NNID meaning I will lose everything? If the latter, is there any way to keep them somehow eg backing them up somehow first?
↧
3ds Flashcard question
Feel like I've asked this but I'm wondering what flashcard has ntr boot compatibility and the ability to play 3ds and nds games ?
↧
Luma 3ds Crashing.
Hey guys I have Luma3DS 9.0 installed on my New 2DS XL, thanks to https://3ds.hacks.guide/get-started. My firmware is 11.7 It worked great for a couple of months, then one night I was in the middle of playing Resident Evil Revelations and it locked up on me. I rebooted several times after the game locked up, then I noticed it was locking up on the main menu. I don't mean black screen, the display just froze and sound shut off. I loaded a backup on to my SD card but it didn't...
Luma 3ds Crashing.
Luma 3ds Crashing.
↧
↧
11.8 update FAQ & how to fix "Failed to apply 1 FIRM patch" and NTR CFW
Just by taking a look at this section, it's obvious there are a lot of confused people which don't really understand what's going on with the whole 11.8 update thing. I really think someone should make a sticky post detailing what's exactly going on, but in the meantime, I'm going to answer the questions I see being asked the most:
11.8 update FAQ & how to fix "Failed to apply 1 FIRM patch" and NTR CFW
- What exactly was changed with the 11.8 update? What happened it that Nintendo, trying to combat piracy on the 3DS, has changed how downloading...
11.8 update FAQ & how to fix "Failed to apply 1 FIRM patch" and NTR CFW
↧
movable.sed error between 288b and 320b
hello, i'm trying to copy my movable.sed to another console so that console can use the same SD as my 3DS
but I have a problem, related to this file
the file i'm trying to copy is a 320 bytes file
but if I try to inject it with Decrypt9, first it shows the file size and then gives an error
View attachment 142557 View attachment 142558
using GodMode9, if I manually go to nand/private, I can see that the file size is 288 bytes (it says 288 bytes on Decrypy9 too)
so if I manually copy the...
movable.sed error between 288b and 320b
but I have a problem, related to this file
the file i'm trying to copy is a 320 bytes file
but if I try to inject it with Decrypt9, first it shows the file size and then gives an error
View attachment 142557 View attachment 142558
using GodMode9, if I manually go to nand/private, I can see that the file size is 288 bytes (it says 288 bytes on Decrypy9 too)
so if I manually copy the...
movable.sed error between 288b and 320b
↧
[R4][Firmwares] * - Ask For Your R4i-SDHC Clone Firmware! - *
So, we all know that sometimes getting the correct firmware or the upgrade .nds file its a pain in the ass, ill be grabbing and looking for the files that you need to use your OLD R4 cards.
Note: Remembers that the firmware does not mean that your card will work on v11 without patching the whitelist on the 3ds or using the patches on some custom firmwares, as well as using the TW Slot Launcher from Apache Thunder.
Do You See Your OLD Card Here?...
[R4][Firmwares] * - Ask For Your R4i-SDHC Clone Firmware! - *
Note: Remembers that the firmware does not mean that your card will work on v11 without patching the whitelist on the 3ds or using the patches on some custom firmwares, as well as using the TW Slot Launcher from Apache Thunder.
Do You See Your OLD Card Here?...
[R4][Firmwares] * - Ask For Your R4i-SDHC Clone Firmware! - *
↧
Hack 2ds with 11.8
Hi guys i am already install the homebrew channels at my 2ds with 11.8 fw but i want to install games o freeshop instead but it say to install freeshop i have to install fbi and to install fbi i have to install CFW soo... i dont know what to do? Somebody can help me?
↧
↧
errdisp please help
Explanation of the issue:
3DS works fine if WIFI is off once wifi is on any attempt to access the wireless such as waiting for 20 seconds after start up or going to settings and attempting to add a wireless connect causes it to crash. 3DS has been unused for weeks only changed luma version to 9.1 even did a ctrnand transfer to 11.5 to see if there was nand corruption this did not solve the issue. This only happens on the o3ds it doesn't effect my n3ds
Steps to reproduce:
Start the console
3DS works fine if WIFI is off once wifi is on any attempt to access the wireless such as waiting for 20 seconds after start up or going to settings and attempting to add a wireless connect causes it to crash. 3DS has been unused for weeks only changed luma version to 9.1 even did a ctrnand transfer to 11.5 to see if there was nand corruption this did not solve the issue. This only happens on the o3ds it doesn't effect my n3ds
Steps to reproduce:
Start the console
↧
R4 SDHC Dual Core on new nintendo 3ds
Hello
↧
[Release]BootNTR Selector
Hello guys ! ![:)]( "smile :)")
I'm sharing with you a little mod of the BootNTR which will allows you to choose the version of NTR you want to load.
You have the choice between the version 3.2, 3.3, 3.6.
Nothing awesome but it can be useful to easily switch NTR's versions.
Features:
- A version selector
- Firm 11.6 compatible
- Should be a bit faster than the...
[Release]BootNTR Selector
I'm sharing with you a little mod of the BootNTR which will allows you to choose the version of NTR you want to load.
You have the choice between the version 3.2, 3.3, 3.6.
Nothing awesome but it can be useful to easily switch NTR's versions.
- A version selector
- Firm 11.6 compatible
- Should be a bit faster than the...
[Release]BootNTR Selector
↧